Cranial functional specialisation for strength precedes morphological evolution in Oviraptorosauria.

Oviraptorosaurians were a theropod dinosaur group that reached high diversity in the Late Cretaceous. Within oviraptorosaurians, the later diverging oviraptorids evolved distinctive crania which were extensively pneumatised, short and tall, and had a robust toothless beak, interpreted as providing a powerful bite for their herbivorous to omnivorous diet. The present study explores the ability of oviraptorid crania to resist large mechanical stresses compared with other theropods and where this adaptation originated within oviraptorosaurians. Digital 3D cranial models were constructed for the earliest diverging oviraptorosaurian, Incisivosaurus gauthieri, and three oviraptorids, Citipati osmolskae, Conchoraptor gracilis, and Khaan mckennai. Finite element analyses indicate oviraptorosaurian crania were stronger than those of other herbivorous theropods (Erlikosaurus and Ornithomimus) and were more comparable to the large, carnivorous Allosaurus. The cranial biomechanics of Incisivosaurus align with oviraptorids, indicating an early establishment of distinctive strengthened cranial biomechanics in Oviraptorosauria, even before the highly modified oviraptorid cranial morphology. Bite modelling, using estimated muscle forces, suggests oviraptorid crania may have functioned closer to structural safety limits. Low mechanical stresses around the beaks of oviraptorids suggest a convergently evolved, functionally distinct rhamphotheca, serving as a cropping/feeding tool rather than for stress reduction, when compared with other herbivorous theropods.

A proxy for brain-to-endocranial cavity index in non-neornithean dinosaurs and other extinct archosaurs.

Although the brain fills nearly the entire cranial cavity in birds, it can occupy a small portion of it in crocodilians. The lack of data regarding the volumetric correspondence between the brain and the cranial cavity hampers thorough assessments of the degree of encephalization in non-neornithean dinosaurs and other extinct archosaurs and, consequently, informed inferences regarding their cognitive capacities. Existing data suggest that, across extant archosaurs, the degree of endocranial doming and the volume of intracranial nonneural components are inversely related. We build upon this information to develop an equation relating these two anatomical features in non-neornithean dinosaurs and other extinct archosaurs. We rely on measurements of the endocast doming and brain-to-endocranial cavity (BEC) index in extant relatives of non-neornithean dinosaurs, namely, the crurotarsans Caiman crocodilus, Crocodylus niloticus, and Crocodylus porosus; the paleognaths Struthio camelus and Apteryx mantelli; and the fowl Macrocephalon maleo, Gallus gallus, Meleagris gallopavo, Phasianus colchicus, and Anas platyrhynchos. Applying the equation to representative endocasts from major clades of dinosaurs, we found that BEC varies from about 0.6 in ceratopsians and thyreophorans to around 0.7 in ornithopods, pachycephalosaurians, sauropods, and theropods. We, therefore, warn against the use of a catch-all value, like 0.5, and instead encourage refinement in the adoption of BEC across archosaurs.

The effects of keratin-coated titanium on osteoblast function and bone regeneration.

Wool derived keratin, due to its demonstrated ability to promote bone formation, has been suggested as a potential bioactive material for implant surfaces. The aim of this study was to assess the effects of keratin-coated titanium on osteoblast functionin vitroand bone healingin vivo. Keratin-coated titanium surfaces were fabricated via solvent casting and molecular grafting. The effect of these surfaces on the attachment, osteogenic gene, and osteogenic protein expression of MG-63 osteoblast-like cells were quantifiedin vitro. The effect of these keratin-modified surfaces on bone healing over three weeks using an intraosseous calvaria defect was assessed in rodents. Keratin coating did not affect MG-63 proliferation or viability, but enhanced osteopontin, osteocalcin and bone morphogenetic expressionin vitro. Histological analysis of recovered calvaria specimens showed osseous defects covered with keratin-coated titanium had a higher percentage of new bone area two weeks after implantation compared to that in defects covered with titanium alone. The keratin-coated surfaces were biocompatible and stimulated osteogenic expression in adherent MG-63 osteoblasts. Furthermore, a pilot preclinical study in rodents suggested keratin may stimulate earlier intraosseous calvaria bone healing.

[Role of Fibroblast Growth Factor 7 in Craniomaxillofacial Development]. / æˆçº¤ç»´ç»†èƒžç”Ÿé•¿å› å­7åœ¨é¢ é¢Œé¢å‘è‚²ä¸­çš„ä½œç”¨.

Craniomaxillofacial development involves a series of highly ordered temporal-spatial cellular differentiation processes in which a variety of cell signaling factors, such as fibroblast growth factors, play important regulatory roles. As a classic fibroblast growth factor, fibroblast growth factor 7 (FGF7) serves a wide range of regulatory functions. Previous studies have demonstrated that FGF7 regulates the proliferation and migration of epithelial cells, protects them, and promotes their repair. Furthermore, recent findings indicate that epithelial cells are not the only ones subjected to the broad and powerful regulatory capacity of FGF7. It has potential effects on skeletal system development as well. In addition, FGF7 plays an important role in the development of craniomaxillofacial organs, such as the palate, the eyes, and the teeth. Nonetheless, the role of FGF7 in oral craniomaxillofacial development needs to be further elucidated. In this paper, we summarized the published research on the role of FGF7 in oral craniomaxillofacial development to demonstrate the overall understanding of FGF7 and its potential functions in oral craniomaxillofacial development.

Toll-like receptor-2 induced inflammation causes local bone formation and activates canonical Wnt signaling.

It is well established that inflammatory processes in the vicinity of bone often induce osteoclast formation and bone resorption. Effects of inflammatory processes on bone formation are less studied. Therefore, we investigated the effect of locally induced inflammation on bone formation. Toll-like receptor (TLR) 2 agonists LPS from Porphyromonas gingivalis and PAM2 were injected once subcutaneously above mouse calvarial bones. After five days, both agonists induced bone formation mainly at endocranial surfaces. The injection resulted in progressively increased calvarial thickness during 21 days. Excessive new bone formation was mainly observed separated from bone resorption cavities. Anti-RANKL did not affect the increase of bone formation. Inflammation caused increased bone formation rate due to increased mineralizing surfaces as assessed by dynamic histomorphometry. In areas close to new bone formation, an abundance of proliferating cells was observed as well as cells robustly stained for Runx2 and alkaline phosphatase. PAM2 increased the mRNA expression of Lrp5, Lrp6 and Wnt7b, and decreased the expression of Sost and Dkk1. In situ hybridization demonstrated decreased Sost mRNA expression in osteocytes present in old bone. An abundance of cells expressed Wnt7b in Runx2-positive osteoblasts and ß-catenin in areas with new bone formation. These data demonstrate that inflammation, not only induces osteoclastogenesis, but also locally activates canonical WNT signaling and stimulates new bone formation independent on bone resorption.

Dual-Channel in Spatial-Frequency Domain CycleGAN for perceptual enhancement of transcranial cortical vascular structure and function.

Observing cortical vascular structures and functions using laser speckle contrast imaging (LSCI) at high resolution plays a crucial role in understanding cerebral pathologies. Usually, open-skull window techniques have been applied to reduce scattering of skull and enhance image quality. However, craniotomy surgeries inevitably induce inflammation, which may obstruct observations in certain scenarios. In contrast, image enhancement algorithms provide popular tools for improving the signal-to-noise ratio (SNR) of LSCI. The current methods were less than satisfactory through intact skulls because the transcranial cortical images were of poor quality. Moreover, existing algorithms do not guarantee the accuracy of dynamic blood flow mappings. In this study, we develop an unsupervised deep learning method, named Dual-Channel in Spatial-Frequency Domain CycleGAN (SF-CycleGAN), to enhance the perceptual quality of cortical blood flow imaging by LSCI. SF-CycleGAN enabled convenient, non-invasive, and effective cortical vascular structure observation and accurate dynamic blood flow mappings without craniotomy surgeries to visualize biodynamics in an undisturbed biological environment. Our experimental results showed that SF-CycleGAN achieved a SNR at least 4.13 dB higher than that of other unsupervised methods, imaged the complete vascular morphology, and enabled the functional observation of small cortical vessels. Additionally, the proposed method showed remarkable robustness and could be generalized to various imaging configurations and image modalities, including fluorescence images, without retraining.

Description and taxonomic assessment of fossil Cercopithecidae from the Pliocene Galili Formation (Ethiopia).

The Mount Galili Formation in the Afar region, Ethiopia, samples a critical time in hominin evolution, 4.4 to 3.8 Ma, documenting the last appearance of Ardipithecus and the origin of Australopithecus. This period is also important in the evolution of cercopithecids, especially the origin of Theropithecus in general and Theropithecus oswaldi lineage in particular. Galili has provided a total of 655 cercopithecid specimens that include crania, mandibles, isolated teeth and postcrania. All the fossils were recovered from the Lasdanan (5.3-4.43 Ma), Dhidinley (4.43-3.9 Ma) and Shabeley Laag (∼3.92-3.8 Ma) Members. Here, we described and analyzed 362 fossils employing both qualitative and quantitative methods. Descriptions of the material were supplemented with dental metrics and cranial shape analysis using three-dimensional geometric morphometrics. Results indicate the presence of at least six cercopithecid taxa: Theropithecus oswaldi serengetensis (n = 28), Theropithecus sp. (n = 2), three non-Theropithecus papionin groups (n = 134) and one colobine-size group (n = 58). The T. o. serengetensis represents the earliest form of the lineage, documented from ∼3.9 Ma Galili sediments. The three Galili papionins include a smaller taxon, a medium-sized taxon comparable to Pliopapio alemui and a large papionin overlapping in size with Soromandrillus, Gorgopithecus and Dinopithecus. The majority of Galili colobines have closest affinities to Kuseracolobus aramisi and some overlap with other taxa. Papionins dominate the Galili cercopithecid collection, although colobines are still fairly common (approximately 25% of the sample). Thus, Galili sample is like Kanapoi (4.2-4.1 Ma) and Gona (5.2-3.9 Ma) localities but distinct from Aramis, suggesting paleoecological similarity to the former sites. On the other hand, Theropithecus is less abundant at Galili than geologically younger Hadar (3.4-3.2 Ma) and Woranso-Mille (3.8-3.6 Ma) sites. Whether this difference is due to sampling, time or landscape variation requires further investigation.

Apical expansion of calvarial osteoblasts and suture patency is dependent on fibronectin cues.

The skull roof, or calvaria, is comprised of interlocking plates of bones that encase the brain. Separating these bones are fibrous sutures that permit growth. Currently, we do not understand the instructions for directional growth of the calvaria, a process which is error-prone and can lead to skeletal deficiencies or premature suture fusion (craniosynostosis, CS). Here, we identify graded expression of fibronectin (FN1) in the mouse embryonic cranial mesenchyme (CM) that precedes the apical expansion of calvaria. Conditional deletion of Fn1 or Wasl leads to diminished frontal bone expansion by altering cell shape and focal actin enrichment, respectively, suggesting defective migration of calvarial progenitors. Interestingly, Fn1 mutants have premature fusion of coronal sutures. Consistently, syndromic forms of CS in humans exhibit dysregulated FN1 expression, and we also find FN1 expression altered in a mouse CS model of Apert syndrome. These data support a model of FN1 as a directional substrate for calvarial osteoblast migration that may be a common mechanism underlying many cranial disorders of disparate genetic etiologies.

Power-integrated, wireless neural recording systems on the cranium using a direct printing method for deep-brain analysis.

Conventional power-integrated wireless neural recording devices suffer from bulky, rigid batteries in head-mounted configurations, hindering the precise interpretation of the subject's natural behaviors. These power sources also pose risks of material leakage and overheating. We present the direct printing of a power-integrated wireless neural recording system that seamlessly conforms to the cranium. A quasi-solid-state Zn-ion microbattery was 3D-printed as a built-in power source geometrically synchronized to the shape of a mouse skull. Soft deep-brain neural probes, interconnections, and auxiliary electronics were also printed using liquid metals on the cranium with high resolutions. In vivo studies using mice demonstrated the reliability and biocompatibility of this wireless neural recording system, enabling the monitoring of neural activities across extensive brain regions without notable heat generation. This all-printed neural interface system revolutionizes brain research, providing bio-conformable, customizable configurations for improved data quality and naturalistic experimentation.

In vivo validation of highly customized cranial Ti-6AL-4V ELI prostheses fabricated through incremental forming and superplastic forming: an ovine model study.

Cranial reconstructions are essential for restoring both function and aesthetics in patients with craniofacial deformities or traumatic injuries. Titanium prostheses have gained popularity due to their biocompatibility, strength, and corrosion resistance. The use of Superplastic Forming (SPF) and Single Point Incremental Forming (SPIF) techniques to create titanium prostheses, specifically designed for cranial reconstructions was investigated in an ovine model through microtomographic and histomorphometric analyses. The results obtained from the explanted specimens revealed significant variations in bone volume, trabecular thickness, spacing, and number across different regions of interest (VOIs or ROIs). Those regions next to the center of the cranial defect exhibited the most immature bone, characterized by higher porosity, decreased trabecular thickness, and wider trabecular spacing. Dynamic histomorphometry demonstrated differences in the mineralizing surface to bone surface ratio (MS/BS) and mineral apposition rate (MAR) depending on the timing of fluorochrome administration. A layer of connective tissue separated the prosthesis and the bone tissue. Overall, the study provided validation for the use of cranial prostheses made using SPF and SPIF techniques, offering insights into the processes of bone formation and remodeling in the implanted ovine model.

Extended reality in cranial and spinal neurosurgery - a bibliometric analysis.

PURPOSE: This bibliometric analysis of the top 100 cited articles on extended reality (XR) in neurosurgery aimed to reveal trends in this research field. Gender differences in authorship and global distribution of the most-cited articles were also addressed. METHODS: A Web of Science electronic database search was conducted. The top 100 most-cited articles related to the scope of this review were retrieved and analyzed for trends in publications, journal characteristics, authorship, global distribution, study design, and focus areas. After a brief description of the top 100 publications, a comparative analysis between spinal and cranial publications was performed. RESULTS: From 2005, there was a significant increase in spinal neurosurgery publications with a focus on pedicle screw placement. Most articles were original research studies, with an emphasis on augmented reality (AR). In cranial neurosurgery, there was no notable increase in publications. There was an increase in studies assessing both AR and virtual reality (VR) research, with a notable emphasis on VR compared to AR. Education, surgical skills assessment, and surgical planning were more common themes in cranial studies compared to spinal studies. Female authorship was notably low in both groups, with no significant increase over time. The USA and Canada contributed most of the publications in the research field. CONCLUSIONS: Research regarding the use of XR in neurosurgery increased significantly from 2005. Cranial research focused on VR and resident education while spinal research focused on AR and neuronavigation. Female authorship was underrepresented. North America provides most of the high-impact research in this area.

Long-term results of minimally invasive strip craniectomy without helmet therapy for scaphocephaly - a single-centre experience.

Scaphocephaly is the most common type of craniosynostosis and various surgical techniques are used for treatment. Due to late postoperative changes of the head shape, long-term outcome data is important for evaluating any new surgical technique. At our institution, minimally invasive strip craniectomy without regular helmet therapy is the standard treatment in scaphocephalic patients. Between October 2021 and February 2023, we retrospectively examined the skull shape of patients who underwent minimally invasive strip craniectomy for scaphocephaly using a 3D surface scan technique. The cephalic index (CI), the need for helmet therapy and additional cosmetic outcome parameters were investigated. We included 70 patients (72.5% male). The mean follow-up time was 46 (10-125) months and the mean CI was 75.7 (66.7-85.2). In 58 patients, the final cosmetic result was rated as "excellent/good" (mean CI: 76.3; 70.4-85.0), in 11 as "intermediate" (mean CI: 73.3; 66.7-77.6), and in one case as "unsatisfactory" (CI 69.3). The presence of a suboccipital protrusion was associated with a "less than good" outcome. The CI correlated significantly with the overall outcome, the presence of frontal bossing, and the interval between scan and surgery (age at scan). Minimally invasive strip craniectomy is an elegant and safe method to correct scaphocephaly. Our data show good cosmetic results in the long term even without regular postoperative helmet therapy.

Establishment of an Animal Model of Dog Bite Injuries.

Nowadays dog bite is becoming a world public health problem. Therefore, the study aimed to develop a dog bite animal model that is helpful to solve these problems. In this study, the skull of an adult dog was scanned. The three-dimensional model of the dog maxillofacial bones and dentition was built by MIMICS. Next, the model was printed with Co-Cr alloy by using selective laser sintering technology to develop the dog bite simulation pliers. Then, to simulate dog bite to most, the maximum bite force of the pliers was measured and actions contained in dog bite process was analyzed. Afterwards, according to action analysis results, rabbits were bitten by the prepared instrument in actions that simulate dog's bite. Finally, the reproducibility and controllability of this animal model of dog bite injuries was validated in an in vivo study. The results showed a reliable animal model of dog bite injuries has been developed in this study. The sites and severities of the injuries could be adjusted as the operator wishes and the animal model of dog bite injuries was highly repeatable. This study also indicates the feasibility of using digital technology in establishing animal bite models.

Morphological disparity and structural performance of the dromaeosaurid skull informs ecology and evolutionary history.

Non-avialan theropod dinosaurs had diverse ecologies and varied skull morphologies. Previous studies of theropod cranial morphology mostly focused on higher-level taxa or characteristics associated with herbivory. To better understand morphological disparity and function within carnivorous theropod families, here we focus on the Dromaeosauridae, 'raptors' traditionally seen as agile carnivorous hunters.We applied 2D geometric morphometrics to quantify skull shape, performed mechanical advantage analysis to assess the efficiency of bite force transfer, and performed finite element analysis to examine strain distribution in the skull during biting. We find that dromaeosaurid skull morphology was less disparate than most non-avialan theropod groups. Their skulls show a continuum of form between those that are tall and short and those that are flat and long. We hypothesise that this narrower morphological disparity indicates developmental constraint on skull shape, as observed in some mammalian families. Mechanical advantage indicates that Dromaeosaurus albertensis and Deinonychus antirrhopus were adapted for relatively high bite forces, while Halszkaraptor escuilliei was adapted for high bite speed, and other dromaeosaurids for intermediate bite forces and speeds. Finite element analysis indicates regions of high strain are consistent within dromaeosaurid families but differ between them. Average strain levels do not follow any phylogenetic pattern, possibly due to ecological convergence between distantly-related taxa.Combining our new morphofunctional data with a re-evaluation of previous evidence, we find piscivorous reconstructions of Halszkaraptor escuilliei to be unlikely, and instead suggest an invertivorous diet and possible adaptations for feeding in murky water or other low-visibility conditions. We support Deinonychus antirrhopus as being adapted for taking large vertebrate prey, but we find that its skull is relatively less resistant to bite forces than other dromaeosaurids. Given the recovery of high bite force resistance for Velociraptor mongoliensis, which is believed to have regularly engaged in scavenging behaviour, we suggest that higher bite force resistance in a dromaeosaurid taxon may reflect a greater reliance on scavenging rather than fresh kills.Comparisons to the troodontid Gobivenator mongoliensis suggest that a gracile rostrum like that of Velociraptor mongoliensis is ancestral to their closest common ancestor (Deinonychosauria) and the robust rostra of Dromaeosaurus albertensis and Deinonychus antirrhopus are a derived condition. Gobivenator mongoliensis also displays a higher jaw mechanical advantage and lower resistance to bite force than the examined dromaeosaurids, but given the hypothesised ecological divergence of troodontids from dromaeosaurids it is unclear which group, if either, represents the ancestral condition. Future work extending sampling to troodontids would therefore be invaluable and provide much needed context to the origin of skull form and function in early birds. This study illustrates how skull shape and functional metrics can discern non-avialan theropod ecology at lower taxonomic levels and identify variants of carnivorous feeding.

New insights into pterosaur cranial anatomy: X-ray imaging reveals palatal structure and evolutionary trends.

Among the least studied portion of the pterosaur skeleton is the palate, which tends to be poorly preserved and commonly only visible from one side (the ventral portion). Even in well-preserved specimens, the bones tend to be fused, with the limits of individual palatal elements obscured. To shed new light on this region, we employed advanced X-ray imaging techniques on the non-pterodactyloid Kunpengopterus (Wukongopteridae), and the pterodactyloids Dsungaripterus (Dsungaripteridae), Hongshanopterus (Istiodactylidae), and Hamipterus (Hamipteridae). Our analyses revealed the presence of sutures between palatal bones in Dsungaripterus and Kunpengopterus, which resulted in different interpretations of the relation between palatine, ectopterygoid, and pterygoid, leading to a new identification of the palatal openings. Furthermore, our study shows six main observations such as the variation of the angle between the palatine rami and the variation in the relative sizes of the palatal openings. We also point out that the presence of a maxillopalatine fenestra (previously identified as postpalatine fenestra), is unique within Diapsida. Although much more work needs to be done, we showed that advanced X-ray imaging techniques open a window for understanding pterosaur cranial anatomy and provide a new perspective for investigating the evolutionary history of these flying reptiles.

Unexpectedly uneven distribution of functional trade-offs explains cranial morphological diversity in carnivores.

Functional trade-offs can affect patterns of morphological and ecological evolution as well as the magnitude of morphological changes through evolutionary time. Using morpho-functional landscape modelling on the cranium of 132 carnivore species, we focused on the macroevolutionary effects of the trade-off between bite force and bite velocity. Here, we show that rates of evolution in form (morphology) are decoupled from rates of evolution in function. Further, we found theoretical morphologies optimising for velocity to be more diverse, while a much smaller phenotypic space was occupied by shapes optimising force. This pattern of differential representation of different functions in theoretical morphological space was highly correlated with patterns of actual morphological disparity. We hypothesise that many-to-one mapping of cranium shape on function may prevent the detection of direct relationships between form and function. As comparatively only few morphologies optimise bite force, species optimising this function may be less abundant because they are less likely to evolve. This, in turn, may explain why certain clades are less variable than others. Given the ubiquity of functional trade-offs in biological systems, these patterns may be general and may help to explain the unevenness of morphological and functional diversity across the tree of life.

Foraging-induced craniofacial plasticity is associated with an early, robust and dynamic transcriptional response.

Phenotypic plasticity is the ability of a single genotype to vary its phenotype in response to the environment. Plasticity of the skeletal system in response to mechanical input is widely studied, but the timing of its transcriptional regulation is not well understood. Here, we used the cichlid feeding apparatus to examine the transcriptional dynamics of skeletal plasticity over time. Using three closely related species that vary in their ability to remodel bone and a panel of 11 genes, including well-studied skeletal differentiation markers and newly characterized environmentally sensitive genes, we examined plasticity at one, two, four and eight weeks following the onset of alternate foraging challenges. We found that the plastic species exhibited environment-specific bursts in gene expression beginning at one week, followed by a sharp decline in levels, while the species with more limited plasticity exhibited consistently low levels of gene expression. This trend held across nearly all genes, suggesting that it is a hallmark of the larger plasticity regulatory network. We conclude that plasticity of the cichlid feeding apparatus is not the result of slowly accumulating gene expression difference over time, but rather is stimulated by early bursts of environment-specific gene expression followed by a return to homeostatic levels.

Virtual reconstruction of the Canis arnensis type (Canidae, Mammalia) from the Upper Valdarno Basin (Italy, Early Pleistocene).

Taphonomic deformation, whether it be brittle or plastic, is possibly the most influential process hindering the correct understanding of fossil species morphology. This is especially true if the deformation affects type specimens or applies to or obscures taxonomically diagnostic or functionally significant traits. Target Deformation, a recently developed virtual manipulation protocol, was implemented to address this issue by applying landmark-guided restoration of the original, deformed fossils, using undeformed specimens (or parts thereof) of the same species as a reference. The enigmatic Early Pleistocene canid Canis arnensis provides a typical example of a fossil species in dire need of virtual restoration. Its lectotype specimen is heavily deformed and none of the few known skulls are well preserved, obscuring the recognition of its systematic and phylogenetic position. Our results indicate that the algorithm effectively countered the lectotype skull's laterolateral compression and its concomitant rostrocaudal elongation. Morphometrically, comparison of the retrodeformed cranium (IGF 867_W) with other specimens of the same species, and to other fossil and extant canid material, confirms IGF 867_W consistently clusters within C. arnensis variability. Overall, the evidence presented here confirms that Target Deformation provides a powerful tool to better characterize complex taxa like C. arnensis, whose knowledge is severely affected by the state of preservation of its fossil material.

A hundred-year-old mystery-the reproductive mode and larval morphology of the enigmatic frog genus Allophryne (Amphibia; Anura; Allophrynidae).

Frogs of the Allophrynidae are an enigmatic family from South America. To date, published information is lacking regarding this group's reproductive biology and larval morphology. Here, we provide the first detailed description of the reproductive mode, developmental mode, and tadpole morphology for Allophryne ruthveni. We developed a captive breeding and rearing protocol for this species and then conducted a series of observations to describe aspects of its reproductive biology. In captivity, this species exhibits aquatic oviposition, where single eggs are laid ungrouped within a simple jelly capsule and are scattered free in the water column before sinking to develop on benthic substrates. We did not observe parental care nor any parental interactions with eggs post-fertilization. Tadpoles are characterized by an oval body, anteroventral oral disc, a labial tooth row formula of 2(2)/3, and a dextral vent tube. The buccopharyngeal cavity is marked by the presence of two pairs of infralabial papilla and four lingual papillae. Cranial morphology is characterized by the presence of the commissura quadratoorbital. This species possesses an additional slip of the m. rectus cervicis and of the m. levator arcuum branchialium III. We discuss our results in comparison with glassfrogs (Centrolenidae).

Emigration of Greek Knowledge to the Arab World.

The period described in this chapter reflects activity prior to the establishment of surgical centers in Europe in the twelfth century. It is a kind of prologue to the reintroduction of high-quality surgical practice. Religious squabbles within Christianity led to European medicine and surgery, the principles of which were written in Greek, being transported eastwards into the region newly dominated by Islam. There the works were translated into Arabic and during three to four hundred years, the works were not only retained but were enriched by contributions from within Arab culture. This evolution naturally enough came to affect what happened next. However, one thing is clear and was even commented on as early as by Albucasis. The surgeon's respect and distinction within society had depreciated during the sojourn of medical science in the Islamic world, with physicians being regarded as distinctly superior beings. With regard to specific details related to opening the head there was broad consistency between the various authors all of whom seem to have been greatly influenced by Paul of Ægina. Thus, there is no mention of the crown trepan. Opening the skull was performed with the non-perforating trepans making small holes which were connected with chisels or lenticulars. The indication to do this was separation of the dura from the bone. Whether or not the sutures should be avoided when trepanning is not a topic mentioned in these writings. There was also no recommendation for prophylactic trepanation.